Hydro-Mist - Model I

The Hydro-Mist eliminates perc-contaminated wastewater produced by distillation, water separators, vacuum units and cartridge dryers. A set of primary and secondary carbon cartridges purify contaminated water, which is siphoned through an air pressure system producing a fine "Cool" mist.

Hydro-Mist
Setting the Standard for Performance

Cabinetry:
Constructed of stainless steel.

Contaminated Water Tank
Holds up to five gallons of perc contaminated water.

Lid:
Prevents debris from falling into Water Tank.

Clean-Out Port:
Allows easy cleaning of Contaminated Water Tank.

Evaporator Nozzle:
Atomizes water into tiny droplets that evaporate almost instantly.

Air Pressure System:
Creates air velocity that pulls water through cartridges into the evaporator nozzles.

Plunger Cleaning Button:
Dirty Nozzles are easily cleaned by pushing the Plunger Cleaning Button located on the underside of the nozzle. A cleaning needle will rise up through the orifice and dislodge the foreign body.

Sight Tube:
Views perc contaminate water level in Cartridge Cavity.

Built-in Separator:
Allows free perc to separate before the contaminated water enters the cartridges.

Perc Float:
Visual indication of free perc.

Perc Drain Valve:
Location on bottom of unit allows draining of free excess perc.

Environmental Impact

Air Impact:
No contaminated air is produced from this equipment.

Water Impact:
Water is evaporated off to the atmosphere at less than 0.1 ppm of perc.

Solid Waste Impact:
Dispose of two carbon cartridges every 3 months.

Energy Impact:
The Hydro-Mist operates on 30 p.s.i.g. air pressure at 1/3 horsepower.